Vehicles after change point in 1982
REMOVING AND INSTALLING/CHECKING
COOLANT TEMPERATURE SENSOR
The temperature sensor measures the engine
temperautre and sends this information as a
resistance value to the control unit.
The resistance value drops with rising
temperature (NTC).
1 = Plug connection
2 = Housing
3 = NTC resistor

3013625 - click to zoom
 
Removing and Installing:
Pull off plug (1).
Unscrew temperature sensor.
Installation:
Tightening torque*.


Siehe auch * See Specifications
281363061 - click to zoom
 
Installation:
Check code number (1)*.
Replace seal (2).
FD = Manufacturing date
Fill and bleed cooling system - see Group 17.


Siehe auch * See Specifications
281362060 - click to zoom
 
Testing:
Connect Jetronic test leads 61 1 440.
Check nominal value* with an ohmmeter.
Testing Entire Temperature Range:
Remove temperature sensor, heat to testing
temperature in a water bath and check
resistance* with an ohmmeter.


Siehe auch * See Specifications
281362062 - click to zoom