Vehicles after change point in 1982
REMOVING AND INSTALLING CONTROL UNIT
Open the glove box.
Lift out retainer (1).
Pull off pin (2) of both retaining straps.

2864644 - click to zoom
 
Push back lock (1) and pull out multiple pin
plug (2).
Installation:
Plug (3) must be connected.
Check for correct connection of plugs
(polarity).
Relay (4) = fuel pump relay
Relay (5) = master relay

281361001 - click to zoom
 
Plug connections - see wiring diagram or
Group 12.

1361007 - click to zoom
 
Unscrew both screws on left and right sides
of the control unit.
Installation:
Adjust engine idle speed - see 13 00 054.


Siehe auch 13 00 054
281361002 - click to zoom
 
Installation:
Check code number (1)* and manufacturing
date (2)*.


Siehe auch * See Specifications and Nominal Value Microfiche
1361013 - click to zoom
 
Important!
M 6 cars have a black plug and a blue plug in
the wire harness for the Motronic control unit.
The black plug (1) must be connected, while
the blue plug (2) remains open.

1361030 - click to zoom