REPLACING IGNITION COIL
Important: Stop engine and turn off ignition
prior to performing any work on a transistor
ignition system. DANGER!
Check ignition coil 11 00 009.
Pull off wires.
Detach ignition coil from holder.
Installation:
Black/red wire to term. 15 = M 6 threads
Black wire to term. 1 = M 5 threads
Important: Don´t mix up coils for ignition systems
with points and those for (breakerless)
transistor ignition systems.
Bosch No. 0 221 119 017 (with points)
Bosch No. 0 221 122 010 (breakerless)
If mixed up, points could burn out quickly and
cause failure and cold starting difficulties.


Siehe auch * See Specifications
73312042 - click to zoom
 
Vehicles after change point in 1982
Caution!
Always turn off ignition before working on the ignition system - dangerous high voltage!
Refer to page 12 - 0 for instructions for working on ignition system.
 
Pull off protective cap and ignition lead (term. 4).
Unscrew connections (term. 1 and 15).
Unscrew holder and take off ignition coil.

63012009 - click to zoom
 
Installation:
Check new ignition coil for correct code number* and color label*.


Siehe auch * See Specifications
3012127 - click to zoom