REPLACING GUIDE BEARING IN CRANKSHAFT
- Clutch Removed -
a) Version with Needle Bearing:
Pull out needle bearing from crankshaft with
Special Tool 11 2 010.
Important: Apply special tool that pulling
hooks grab behind the needle bearing.

Installation: Install needle bearing that lettering
faces out.
Pack bore in crankshaft with approx. 1 gram of
brand name multi-purpose grease (drip point
180°C/356°F).
Knock in needle bearing with a suitable mandrel.
Keep distance A = 3 mm (0.120´´).

b) Version with Grooved Ball Bearing:
Pull out grooved ball bearing (1), cover (2),
felt ring (3) and end cap (4) from crankshaft
with Special Tool 11 2 010.
Installation: Pack bore in crankshaft with approx.
1 gram of brand name multi-purpose
grease (drip point 180°C/356°F).
Insert cover (2) with engraving facing out.

Vehicles after change point in 1982
REPLACING PILOT BEARING
IN CRANKSHAFT
Remove clutch disc 21 21 000.
Pull out ball bearing with Special Tool 11 2 010.
Cars with Automatic Transmission:
Pull out adapter sleeve with Special Tool 11 2 020.


21 21 000

Installed Order:
Ball bearing (1), cover (2), felt ring (3) and capsule (4).
Insert cover (2) with embossment facing out.

Pack bore in crankshaft with approx. 1 gram of lubricating grease.
Drive in pilot bearing with Special Tools 11 2 030 and 00 5 500.