AIMING HEADLIGHTS
Check tire pressures, correcting if necessary.
Park car on level floor and load down with 70 kg
(154 lbs.) or 1 person on center of rear seat.
Aim low and hight beams with an optical aimer
according to instructions supplied with equipment.

Open engine hood.
Remove covers.
Adjust headlight beams by turning plastic
knurled knobs.
1 = Lateral control
2 = Vertical control

Vehicles after change point in 1982
AIMING HEADLIGHTS
Check tire inflation pressure, correcting if necessary.
Bring car to normal postion*.
Check high and low beams with an optical aimer according to instructions suppled
with equipment.


* See Specifications

Correcting:
Take off headlight cover.

Turn knurled head screws.
1 = Vertical control
2 = Lateral control