REPLACING BOTH BRAKE PAD WEAR SENSORS
Description:
If with ignition turned on and test button
pressed the green "brake pad" lamp does not
come on, brake pads are worn or wires of
sensors have a braks.
If both are not applicable, light bulb could be
burnt.
Remove front left and rear right wheels.
Lift out plug connector from clamp and
disconnect.
Installation: Note lock.

63061090 - click to zoom
 
Pull out sensor from brake pad.
Installation: Wide side of sensor faces brake
disc.
Make sure that brake pad fits correctly.

63061091 - click to zoom
 
Lift rear plug connector out of clamp and
disconnect.
Installation: Note lock.

63061092 - click to zoom
 
Pull out sensor from brake pad.
Installation: Wide side of sensor faces brake
disc.
Make sure that brake pad fits correctly.

63061093 - click to zoom