REMOVING AND INSTALLING TURN SIGNAL/HEADLIGHT
DIMMER SWITCH
Disconnect minus lead at battery.
Remove and install lower casing - 32 31 020.
Remove and install steering wheel - 32 33 000.
Loosen screws.
Installation: For old version, adjust self-
cancelling cam - 32 31 131.


32 31 020
32 33 000
* See Specifications

Detach wire straps.
Installation: Check wire straps and replace
if necessary.

Up to 1978 Models:
Pull off central plug and remove switch.

From 1978 Models:
Pull of central plug and remove switch.

Vehicles after change point in 1982
Disconnect battery ground lead.
Remove steering wheel 32 33 000.
Remove instrument panel trim at bottom left - 51 45 180.
Unscrew steering column casing.


32 33 000
51 45 180

Disconnect plugs (1 and 2).

Unscrew screws.
Pull relay out of holder.
Pull off plug on relay.