REPLACING DRIVE CABLE BETWEEN MOTOR
AND GEARBOX ON ROOF FRAME
Remove and install front roof liner plate
51 44 150.
Steel sun roof must be closed.
Loosen screws and take off cover plate.
Installation: Opening faces forward.


Siehe auch 51 44 150
63054029 - click to zoom
 
Install cover plate mounting screws in pinion
and pull out pinion.

63054031 - click to zoom
 
Install emergency winder (1) in gearbox.

63054057 - click to zoom
 
Remove tail panel trim on inside of trunk
51 47 240.
Turn emergency winder anticlockwise with a
spark plug wrench.
Turn out drive cable toward rear.
Installation: First guide short end of cable
(as from color mark) into outlet tube.
Lubricate cable with a light coat of grease.


Siehe auch 51 47 240
63054032 - click to zoom
 
Installation: Turn in drive cable up to center of
color mark.
Install pinion in this position and attach cover
plate.

63054057 - click to zoom