REMOVING AND INSTALLING TRIM
FOR TRAY (HATRACK)
Remove and install rear seats 52 20 100.
Detach headrest trim.
Unscrew screws at top left and right.


Siehe auch 52 20 100
63052028 - click to zoom
 
If applicable, remove headrests.
Detach trim at bottom and remove.

63052029 - click to zoom
 
Detach seat belt at bottom.

63072017 - click to zoom
 
Take out cap.
Detach belt fitting on side of rear window
frame.

63072015 - click to zoom
 
Lift tray out of clamps at front, rear and sides.
Lift out plate for seat belt and pull belt through.
If applicable, disconnect rear speakers and
remove tray.

63051257 - click to zoom
 
Vehicles after change point in 1982
REMOVING AND INSTALLING
HATRACK TRIM PANEL
Remove both rear seats - see 52 20 100.
Remove trim for headrests.
Unscrew screws at top left and right.


Siehe auch 52 20 100
63052028 - click to zoom
 
If applicable, pull off trim and lift out the
additional stop light.

73051824 - click to zoom
 
If applicable, remove headrests.
Unscrew trim at bottom and remove.

63052029 - click to zoom
 
Unscrew seat belt at bottom.

63072017 - click to zoom
 
Lift out cap.
Unscrew pivot on side of rear window frame.

63072015 - click to zoom
 
Lift trim panel out of clips at front, rear and
sides.
Lift out seat belt opening frame and pull out
the seat belt.
If applicalbe, disconnect rear radio speakers
and take out the trim panel.

63051257 - click to zoom