REPLACING ABSORBER FOR REAR BUMPER Remove and install rear bumper - 51 12 000. Detach impact absorber holder from absorber. Installation: Torque values¹).  51 12 000 ¹) See Specifications
|  |
 |
|
For center absorber, fold back trunk mat and unscrew bolt. Installation: Torque values¹). ¹) See Specifications
|  |
For outer absorbers, detach and attach tail panel trim - 51 47 240. Pull off edge guard and side trim carefully. Unscrew bolt and take off absorber. Installation: Torque values¹). 51 47 240 ¹) See Specifications
|  |
Vehicles after change point in 1982 REPLACING REAR BUMPER IMPACT ABSORBERS Remove and install rear bumper assembly 51 12 000. Unscrew brackets on impact absorbers. Installation: Thick washer on top. Tightening torque*. 51 12 000 * See Specifications
| |
Unscrew bolt. | |
Center Impact Absorber: Fold back trunk mat. Unscrew bolt. Pull out impact absorber. Installation: Tightening torque*. Install bolt with Loctite**. * See Specifications ** Source: HWB
| |
Left and Right Impact Absorbers: Disconnect trim partially. Unscrew bolt. Pull out impact absorber. Installation: Tightening torque*. Install bolt with Loctite**. * See Specifications ** Source: HWB
| |
