Vehicles after change point in 1982 REPLACING BEARING SLEEVE FOR CLUTCH PEADL Remove pedal - see 35 21 000 or 35 31 000. Pedal with Molded Bearing Sleeve: Replace the pedal when worn. If pedal moves hesitantly, drill or ream out the bearing sleeve to the finished size diameter of 14.2 + 0.1 mm (0.559 + 0.004"). Lubricate bearing surface with grease*.  35 21 000 35 31 000 * See Specifications
|  |
Pedal with Pressed In Bearing Sleeves: Identification: Bearing sleeves protrude into the guide tube on the left and right sides by only approx. 17 mm (0.669"). Press out bearing sleeves (1) for brake and clutch pedals. |  |
 |
