1980 Models
REMOVING AND INSTALLING/REPLACING FUEL TANK
Disconnect ground wire at battery.
Open tank flap.
Remove rubber cover (1).
Important: Fuel tank doesn´t have a drain plug.
Watch fuel level, drawing off fuel if necessary.

63316013 - click to zoom
 
Remove mat from trunk.
Unscrew cover (2).
Disconnect plugs and fuel hoses.
Installation: Use new squeeze hose clamps.

63316014 - click to zoom
 
Remove side trim panel.
Pull off hoses on expansion tank and push
through to filler neck.
Installation: Use new squeeze hose clamps.

63316015 - click to zoom
 
Lift out rubber ring from front final muffler
suspension.

63018013 - click to zoom
 
Lift out rubber rigns.
Suspend final muffler with a piece of wire.
Loosen screw (1).
Remove screw (2).
Swing back the bracket.

63316016 - click to zoom
 
Remove screws (10 and 11).

63316011 - click to zoom
 
Remove tank.
Important: Remove wire straps.
Installation: Usw new wire straps.

63316017 - click to zoom
 
Replacing Tank:
Transfer shield (1), guard (2), hoses (3), fuel
level transmitter (4) and liners (5).

63316018 - click to zoom