REMOVING AND INSTALLING FUEL TANK
Disconnect ground wire at battery.
Remove mat from trunk.
Take off cover (1).

53016011 - click to zoom
 
Detach hoses and wires.
Installation:
2 = intake line
3 = return line
4 = wire plug
br/ge = brown/yellow
br = brown
br/sw = brown/black

53016013 - click to zoom
 
Detach hoses (5 ... 7) on expansion tank.
Installation: Use new squeeze-hose clamps.

53016014 - click to zoom
 
Remove cover (8).

53016015 - click to zoom
 
Lift out rubber ring from front final muffler
suspension.

63018013 - click to zoom
 
Lift out rubber rings from rear final muffler
suspension.

63018014 - click to zoom
 
Unscrew bracket (9).

53016017 - click to zoom
 
Unscrew screw (10).
Loosen screw (11).
Remove fuel tank downward and to the right.

63316011 - click to zoom
 
Vehicles after change point in 1982
REMOVING AND INSTALLING
FUEL TANK
Drain fuel tank with a scavenging pump**, or if necessary by removing the
drain plug.
Caution!
Comply with safety regulations when draining and filling fuel tank.
Tightening torque*.


Siehe auch * See Specifications
Siehe auch * Source: HWB
3016003 - click to zoom
 

Pull over (1).
Loosen hose clamps and pull off vent lines.

2816100 - click to zoom
 
Remove trunk mat.
Unscrew cover (2).
Pull off plug.
Loosen hose clmaps and pull off lines.

63316014 - click to zoom
 
Prevent final muffler from falling down (with a piece of wire).
Unscrew bolt (1).
Unscrew tank mounting bolt (2).

63316027 - click to zoom
 
Disconnect center muffler suspension (1).

63316028 - click to zoom
 
Prevent fuel tank from falling down.
Cut hose strap (2).
Unscrew bolts (1) and remove fuel tank.

2816002 - click to zoom