Vehicles after change point in 1982
REMOVING AND INSTALLING COLD START VALVE
Note:
Some of the models no longer have a cold
start valve.
Removing and Installing:
Pull off plug (1).
Unscrew fuel hose (2).
Unscrew bolts.
Take off cold start valve.

Installation:
Check code number (1)*.
Replace seal (2).


* See Specifications

Checking:
Open the glove box.
Pull off fuel pump relay (1).
Bridge terminals 87 and 30 with Special Tool
61 3 050.
The fuel pump runs.

Leak Test:
Check permissible leak rate*.


* See Specifications

Checking Fuel Flow Rate and Spray Angle:
Hold the cold start valve in a measuring cup,
Special Tool 13 3 020.
Plug Jetronic test leads 61 1 440 on the cold
start valve on connect with B+ and B-.
Check the fuel flow rate* and spray angle (1)*.


* See Specifications