Vehicles after change point in 1982 REMOVING AND INSTALLING FUEL PUMP Push back caps (1). Loosen nuts (2 and 3) and take off wires. |  |
Pinch intake hose (1) and pressure hose (2) with Special Tool 13 3 010. Open straps (3) and pull off hoses. Note: Do not use squeeze-hose clamps for installation of the pressure hose. |  |
Unscrew bolt (1) and nuts (2). Take off the fuel pump with filter. |  |
Unscrew bolt (1) and take off holder. |  |
Loosen hose clamp (1) on fuel filter and pull off the fuel hose. Take off rubber ring (2). Installation: Check direction of flow - the input and output ends of the filter are marked. Do not use a squeeze-hose clamp. |  |
Loosen hose clamp (1) on fuel pump and pull off the fuel hose. Pull off rubber ring (3). Note: 2 = Code number*  * See Specifications
|  |
 |
