Vehicles after change point in 1982
REMOVING AND INSTALLING
CATALYTIC CONVERTER
Disconnect plug for oxygen sensor.
If applicable, cut off wire strap on transmission.
Installation:
Seal plug connection against moisture with sealing compound and
insulating tape.

0003812 - click to zoom
 
Unscrew front flange bolts.
Installation:
Replace gaskets and self-locking nuts.
Tightening torque*.


Siehe auch * See Specifications
0003812 - click to zoom
 
Unscrew bolt (1).
Loosen bolts (2).
Installation:
First tighten bolt (19 and then bolts (2) to avoid tension.

0003813 - click to zoom
 
Unscrew rear flange bolts and take off catalytic converter.
Installation:
Replace gaskets and self-locking nuts.
Tightening torque*.


Siehe auch * See Specifications
0003810 - click to zoom